Eligibility Confirmed
Required learner period, driving hours and HPT completed.
Victorian Drive Test Resource
Driving Test Checklist Victoria
Use this complete checklist to organise your eligibility, documents, test vehicle, personal preparation and appointment arrangements before your Victorian Drive Test.
✓
Documents checklist
✓
Vehicle safety checks
✓
Test-day preparation
Documents Ready
Permit, identity evidence and driving-hour record organised.
Vehicle Checked
Registered, suitable, roadworthy and ready for assessment.
Why Preparation Matters
Avoid Preventable Test-Day Problems
Preparing for the Drive Test involves more than practising your driving. You must also confirm that you are eligible, attend the correct location, bring the required evidence and provide a suitable vehicle.
Completing these checks several days before the appointment gives you time to correct any problem without unnecessary test-day pressure.
Read the VicRoads Drive Test Guide →
Complete Preparation List
Your Victorian Driving Test Checklist
Work through each section before your appointment. Check current official requirements if your circumstances are unusual or have recently changed.
01
Before Booking
Eligibility Checklist
02
Booking Details
Appointment Checklist
03
Identification
Documents Checklist
04
Test Vehicle
Vehicle Checklist
05
Pre-Drive Check
Vehicle Controls Checklist
06
Driving Skills
Readiness Checklist
07
Personal Preparation
Driver Checklist
08
Before Leaving Home
Final Departure Checklist
Essential Items
Documents and Evidence to Organise
Keep your required documents together so they are easy to access during the customer-service check-in process.
Learner Permit
Bring your current learner permit card or accepted digital driver’s licence.
Identity Evidence
Bring original accepted identity documents if your learner permit is unavailable or VicRoads has requested further evidence.
Driving-Hour Record
Ensure your myLearners record, logbook or combined record is complete and declared where applicable.
Medical Documents
Carry any report, condition approval or medical documentation specifically requested by VicRoads.
!
Check Official Identity Requirements ↗
Use Original Documents Where Required
Ordinary photocopies, photographs or unsupported digital copies may not satisfy evidence-of-identity requirements.
Test Vehicle Preparation
Check the Vehicle Before Test Day
Do not wait until you arrive at the testing location to discover a defective light, damaged tyre or warning message.
Inspect the vehicle several days before the appointment and check it again on the morning of the test.
✓
Registration is current
✓
Tyres are safe and inflated
✓
Lights and indicators work
✓
Windscreen provides clear visibility
✓
Seatbelts and doors function correctly
✓
No safety warning is displayed
Pre-Drive Vehicle Check
Know How to Operate the Vehicle Controls
The testing officer may ask you to identify or operate selected controls before the on-road part of the test begins.
Indicators
Know how to operate and cancel the left and right turn indicators.
Hazard Lights
Identify the hazard-warning control without searching for it.
Headlights
Know the positions for headlights and high beam.
Wipers
Operate the front wipers, washer and relevant rear controls.
Demisters
Identify the front and rear window-demister controls.
Horn
Know where the horn is located and how to operate it.
Parking Brake
Apply and release the parking brake correctly.
Seat Adjustment
Adjust the seat, steering position and head restraint safely.
Final 24 Hours
What to Do the Day Before Your Test
Use the final day to confirm arrangements and rest. Avoid trying to learn too many new skills immediately before the appointment.
Confirm the Booking
Recheck the testing location, arrival time, instructor meeting arrangements and vehicle booking.
Prepare Your Documents
Place your permit, identity documents and other required evidence together.
Inspect the Vehicle
Check tyres, lights, windows, mirrors, fuel or battery level and dashboard warnings.
Review Key Habits
Mentally review mirrors, head checks, speed signs, stopping positions and safe gap selection.
Avoid Over-Practising
Stop before tiredness or frustration affects your confidence.
Get Proper Rest
Aim to attend rested, alert and able to concentrate for the full appointment.
Test Morning
01
02
03
04
Give Yourself Time to Prepare Calmly
Rushing can affect concentration before the assessment even begins. Follow a simple routine and leave additional time for unexpected traffic or parking delays.
Eat and Hydrate
Have an appropriate meal and water without overloading on caffeine.
Dress Comfortably
Wear secure footwear that allows smooth pedal control.
Recheck Your Items
Confirm your permit, documents, glasses and payment method are with you.
Leave Early
Plan to arrive with enough time to park and complete the customer-service check-in process.
At the Testing Location
What to Do When You Arrive
Follow the local customer-service and parking instructions at your selected testing location.
Park Legally
Position the vehicle safely in the designated or appropriate parking area.
Check In
Attend the customer-service area and follow the appointment check-in instructions.
Present Documents
Provide your permit and any requested records or identity evidence.
Return to the Vehicle
Follow staff directions about where to wait for the testing officer.
Adjust Your Position
Set the seat, mirrors, steering position and seatbelt before moving.
Listen Carefully
Pay attention to the pre-drive instructions and ask for clarification when genuinely needed.
Avoid These Problems
Common Test-Day Oversights
These preventable problems can create stress, delays or an inability to proceed with the appointment.
Forgetting the Permit
Arriving without the required permit or acceptable original identity evidence.
Incomplete Logbook
Missing declarations, incorrect entries or incomplete required driving hours.
Vehicle Warning Light
Arriving with a warning message or known vehicle fault.
Defective Lights
A brake light, indicator or other required light failing on test day.
Arriving Late
Underestimating traffic, parking or customer-service processing time.
Wrong Location
Attending a different VicRoads centre from the booked testing location.
Missing Glasses
Forgetting corrective lenses required by a licence condition or needed for safe driving.
Unconfirmed Vehicle Booking
Assuming an instructor’s vehicle is available without confirming the date, location and time.
Check Your Driving Readiness
View Mock Driving Test
Complete a Mock Driving Test
A completed document checklist does not automatically mean your driving is test-ready. A mock test can identify repeated safety errors before the official appointment.
✓
Test-style instructions
✓
Reduced instructor assistance
✓
Observation assessment
✓
Speed and positioning review
✓
Hazard-response assessment
✓
Detailed improvement feedback
Complete Test-Day Support
01
02
03
Advice Driving School Test Package
Reduce test-day uncertainty by using a familiar automatic training vehicle and completing a focused warm-up lesson before the appointment.
45-Minute Warm-Up
Review observation, speed management, positioning and manoeuvres before the test.
Test Vehicle Use
Use our automatic dual-control training vehicle during the official appointment.
Instructor Support
Receive practical help with final preparation and test-day arrangements.
Frequently Asked Questions
Driving Test Checklist FAQs
Common questions about documents, vehicles and Victorian test-day preparation.
What documents should I bring to my Victorian Drive Test? +
Bring your current learner permit card or accepted digital driver’s licence. If it is unavailable, you may need acceptable original evidence-of-identity documents. You must also ensure your supervised driving record is completed and declared where applicable.
Do I need to pass the Hazard Perception Test first? +
Yes. Learners progressing to a probationary licence generally must pass the Hazard Perception Test before attending the practical Drive Test.
Does VicRoads provide a vehicle? +
No. You must arrange an eligible vehicle. You may use a suitable private vehicle or your driving instructor’s vehicle.
What happens if the vehicle has a defective light? +
A vehicle that does not satisfy the required safety and suitability conditions may not be accepted for the test. Inspect all lights and other safety items before the appointment.
How early should I arrive? +
Follow the arrival instructions included with your booking and allow additional time for traffic, parking and customer-service check-in. Do not plan to arrive exactly at the appointment time.
Can I use my driving instructor’s vehicle? +
Yes, when the vehicle meets the relevant requirements and its use has been confirmed with the instructor. Advice Driving School includes vehicle use in its Driving Test Package, subject to availability and booking conditions.
Should I book a lesson immediately before the test? +
A focused warm-up can help you become familiar with current traffic conditions and reinforce safe habits. It should be used for final preparation rather than learning major new skills.
What should I do if I forget a direction during the test? +
Ask the testing officer to repeat or clarify the direction. Never make a rushed or unsafe movement simply to follow an instruction.
Is the checklist a replacement for official VicRoads information? +
No. This guide supports preparation, but applicants should always check current official VicRoads and Transport Victoria requirements before their appointment.
Advice Driving School
Need Help Preparing for Test Day?
Book a preparation lesson, mock driving test or complete Driving Test Package with Advice Driving School.
Prepared and Ready
Complete Your Checklist Before Test Day
Confirm your documents, vehicle and preparation before attending your Victorian Drive Test.